Electrical & Circuit Breaker Repair in Raleigh, NC
Circuit breaker repair, dead outlets, flickering lights and intermittent faults — diagnosed to the root cause, then repaired flat-rate.
Diagnostic Visit $89 Only when we need to find the cause. Disclosed before booking and waived on approved repairs of $300 or more. 5.0 out of 5(185+ Google reviews) 185+ Google reviews Licensed & Insured NC License L.32531- Root-cause diagnosis, not symptom-chasing
- Flat-rate quote before any work begins
- Lifetime labor warranty on every repair
Request a Diagnostic Visit
Tell us what isn’t working. We’ll review your request and contact you about scheduling.
- Diagnostic Visit $89 Finds the cause; waived on approved repairs of $300 or more.
- Most Repairs $300–$600 Quoted flat-rate before any work begins.
- Breaker or Connection $300–$360 A single failed breaker or connection, repaired to code.
- Labor Warranty Lifetime If our workmanship ever fails, we come back and fix it.
Electrical Repairs & Troubleshooting Overview
Electrical troubleshooting is detective work: dead outlets, flickering lights and breakers that trip “for no reason” all have a root cause. We isolate it with controlled testing, not guesswork, then quote the repair flat-rate before any work begins, backed by a lifetime labor warranty.
- Methodical Testing
- Flat-Rate Quotes
- Fixed for Good
When To Schedule Electrical Repairs & Troubleshooting Service
Electrical symptoms are your system asking for attention — some politely, some urgently. Book a diagnosis when you see:
Electrical Repairs & Troubleshooting Pricing Guidance
Repair pricing in Raleigh, NC depends on what the diagnosis finds. The factors below have the biggest impact on final cost.
-
Diagnostic Visit
$89Only when we need to find the cause of a problem. Disclosed before booking and waived on approved repairs of $300 or more.
-
Most Electrical Repairs
$300–$600Quoted flat-rate before any work begins. A known problem has a $300 minimum.
-
Single Breaker or Connection Repair
$300–$360One failed breaker or connection, repaired to code and retested.
-
Fault Location
A failed device at the outlet is the low end; a damaged splice buried in an attic junction box takes longer to reach.
-
Wiring Condition
Older aluminum or cloth-insulated wiring may need remediation beyond the single fault.
-
Circuit vs. System Issue
One bad breaker is simple; symptoms across many circuits point to panel or service problems.
- The repair price is explained before work begins and depends on the diagnosed fault
- Lifetime labor warranty on every repair
What’s Wrong? Symptom Finder
Choose the problem you’re seeing for its likely causes and what we check during an $89 diagnostic visit.
Breaker keeps tripping
Likely causes
- An overloaded circuit
- A short or ground fault
- A worn breaker
We check: The load on the circuit, the wiring and devices on it, and the breaker itself.
Find the cause with an $89 diagnostic visit
Outlet or switch stopped working
Likely causes
- A tripped GFCI upstream
- A loose backstab or splice
- A failed device
We check: The GFCIs on the circuit, the connections in the boxes, and the device.
Find the cause with an $89 diagnostic visit
Lights flicker or dim
Likely causes
- A loose connection
- A shared or overloaded circuit
- A bad fixture or dimmer
We check: The connections, what shares the circuit, and the fixture and dimmer.
Find the cause with an $89 diagnostic visit
Warm, buzzing or discolored outlet or switch
Likely causes
- A loose or overheated connection
- A worn device
We check: The device, the connection and the wire behind it.
Find the cause with an $89 diagnostic visit Burning smell or smoke? Call our 24/7 emergency line.
Half the house or a room is out
Likely causes
- A tripped main or two-pole breaker
- A lost leg of service
- A failed connection
We check: The main and branch breakers, and the service connection.
Find the cause with an $89 diagnostic visit
GFCI won’t reset
Likely causes
- A real ground fault downstream
- Moisture
- A failed GFCI
We check: What is on the GFCI’s load side, wet locations, and the GFCI.
Find the cause with an $89 diagnostic visitEmergency or Can It Wait?
Some electrical problems need immediate attention. Others can be safely diagnosed and scheduled.
Emergency
Call now, 24/7
For urgent electrical problems that can be a safety risk.
- Burning smell, smoke, sparks or arcing
- A hot or melted outlet or panel
- Water on electrical
- Power out while neighbors have power
Our 24/7 emergency service: $149 dispatch for a home, $199 for a business, waived when the approved repair is over $360 (home) or $500 (business).
Can Wait
Book a diagnostic visit
For electrical problems that are not an immediate safety risk.
- A dead outlet or switch
- A breaker that trips now and then
- Flickering lights
- A GFCI that won’t reset
- Buzzing without heat or smell
$89 diagnostic visit: we find the cause and quote the repair flat-rate before any work; the $89 is waived on approved repairs of $300 or more.
Not sure? If anything smells hot or burning, treat it as an emergency and call.
How Electrical Repairs & Troubleshooting Gets Completed Properly
A clear process from booking to a finished repair, with the price agreed before any work and a lifetime labor warranty.
-
Book the $89 diagnostic visit
The fee is disclosed before booking.
-
We test and find the cause
A licensed electrician traces the fault with proper test equipment.
-
You get a flat-rate quote before any work
The price depends on the diagnosed fault; most repairs run $300–$600.
-
Approve and we repair
The $89 is waived when you approve a repair of $300 or more. Most repairs are done in the same visit because our vans carry the common breakers and devices.
-
We test it again before we leave
And the labor carries a lifetime warranty.
How the $89 works
The $89 diagnostic is for finding the cause of a problem. The $89 is waived when you approve a repair of $300 or more. If you decide not to go ahead, the $89 covers the visit and the diagnosis.
Request Diagnostic VisitWhat’s Included / What’s Not
We believe in complete transparency. Here’s exactly what’s included in our standard electrical repair service—and what falls outside the scope of work.
Included
-
Full Circuit Diagnosis
Controlled testing to isolate the root cause — not a visual guess.
-
Flat-Rate Written Quote
A fixed price you approve before any repair begins.
-
The Repair Itself
Devices, splices, and wiring sections repaired or replaced to current code.
-
Under-Load Verification
The circuit retested doing its real job before we leave.
Not Included
-
Whole-House Rewiring
If diagnosis reveals systemic wiring issues, that’s a separate quoted project.
-
Panel Replacement
A failing panel is quoted as its own project — honestly and without pressure.
-
Appliance Repair
We repair the circuit and connection; the appliance itself belongs to an appliance tech.
-
Drywall Restoration
Access openings are patched rough; finish work is a separate trade.
Common Electrical Repair Prices
Here are our most common repair prices so you know what to expect.
Breakers & Circuits
- Single breaker or connection repair $300–$360
- Most electrical repairs $300–$600
- Aluminum wiring repair with connectors $45–$85per connection
Outlets & Switches
$180 minimum for regular services; each further device adds its price
- GFCI outlet, installed or replaced in an existing box $65–$120
- Standard light switch $35–$65dimmer $65–$75
- 3-way or 4-way switch $35–$75
- Smart switch $65–$75
- Timer switch $85–$120
- New outlet installation $35–$65
Your exact price is quoted flat-rate before any work begins. The $89 diagnostic applies only when we need to find the cause, and is waived on approved repairs of $300 or more.
Request Diagnostic VisitBenefits of Electrical Repairs & Troubleshooting for Modern Homes
Professional troubleshooting in Raleigh, NC delivers improvements across safety, reliability, and repair cost control.
-
Root Cause, Found the First Time
Testing isolates the actual fault, so you don’t pay to replace parts that were fine.
-
Hazards Caught Before They Escalate
Loose connections, the most common cause of electrical fires, are exactly what testing exposes.
-
Flat-Rate, Approved Before Work
You see what we found and approve a fixed price before any repair begins.
Our Repair Warranty
Clear coverage and time periods, so you know exactly what is covered after your repair.
Our labor and workmanship
Lifetime
If it was installed right, it stays right. Any defect in our work, we come back and fix it at no charge.
-
3 years
Standard circuit breakers
A thermal-magnetic breaker is a simple, durable device. Three years is comfortably inside what we see fail.
-
1 year
AFCI, GFCI and dual-function breakers
These have electronics inside and fail more often than a plain breaker. Every manufacturer shortens its own term on them for the same reason. One year is what we will promise rather than something we cannot back.
-
1 year
Other devices, fixtures and materials we supply
Covered on the manufacturer’s terms, and we handle the claim for you.
-
Not covered
Materials you supply
We will install it, but we cannot stand behind a part we did not choose or source.
How a claim works:
- Tell us what happened
- We come and look
- We put it right
Covers you, the original customer, for as long as you own the home. Read the full warranty
Optional Add-Ons for Electrical Repairs & Troubleshooting
Commonly recommended during electrical repair work in Raleigh, NC, based on what we find at the onsite evaluation.
-
While we’re there
Whole-Home Safety Inspection
While we’re thereA full-system check while we’re there — panel, GFCIs, smoke detector circuits, and grounding.
-
Wet areas
GFCI Outlet Package
Wet areasBring kitchens, baths, garage, and exterior outlets up to current protection standards.
-
Same visit
Fixture and Switch Upgrades
Same visitReplace dated switches, dimmers, and fixtures in the same visit.
Electrical Repairs & Troubleshooting NEC Code Requirements
Every repair must bring the affected work up to the National Electrical Code governing protection, connections, and device listing.
-
NEC 210.8
GFCI Where Required
Repairs in kitchens, baths, laundry, garages, and outdoors must include GFCI protection — grandfathering ends when the work is opened up.
NEC Ref: 210.8. GFCI protection for personnel required in specified dwelling locations.
-
NEC 210.12
AFCI on Affected Circuits
Extended or modified branch circuits in living areas require arc-fault protection at the breaker.
NEC Ref: 210.12. AFCI protection required for 120V branch circuits supplying most dwelling areas.
-
NEC 314.29
Accessible, Listed Splices
Every repaired connection lives in an accessible junction box with listed connectors — no taped or buried joints.
NEC Ref: 314.29. Boxes shall be installed so that the wiring contained in them can be rendered accessible.
-
NEC 240.4(D)
Conductor-Breaker Match
Repaired circuits are verified for correct pairing — 14 AWG on 15A, 12 AWG on 20A — a mismatch we find (and fix) constantly.
NEC Ref: 240.4(D). Small conductors shall be protected at ampacities specified per conductor size.
What People Say About
Our Electrical Services
Homeowners across Raleigh and the Triangle trust our electrical services for reliable results and honest work.
“★★★★★ If I could give Hugo at Electric All Pro 10 stars, I would! I cannot say enough wonderful things about Hugo, the owner of Electric All Pro! This was hands down one of the most extraordinary customer service experiences I've ever had, and I wasn't even a paying customer! I contacted Hugo on a Saturday evening because I was dealing with a concerning electrical issue in my home. He was already fully booked for Monday, but rather than simply turning me away, he offered to help me troubleshoot the problem remotely so I could potentially save money. What happened next absolutely blew me away. Hugo spent at least 30–45 minutes of his own time patiently walking me through the issue via phone and text. I sent him photos of my electrical setup, and he sent photos back with specific areas circled, carefully explaining what I needed to understand and guiding me step by step. He was incredibly knowledgeable, thorough, patient, and reassuring. Never once did I feel rushed or that I was inconveniencing him. And here's the part that really speaks to the kind of person he is: When I offered to compensate him for all the time and expertise he'd given me, he refused. He simply explained that he loves what he does and enjoys helping people. Who does that anymore?! Hugo didn't make a dime from helping me, yet he treated me with the same care and attention I would expect from someone paying for a major electrical job. Thanks to his guidance, my issue was resolved, and I went from feeling worried and overwhelmed to incredibly relieved. Hugo is not only an outstanding electrician; he's an exceptional human being. His honesty, integrity, expertise, kindness, and genuine passion for his work are rare qualities in any business. If you're looking for an electrician in the Durham/Raleigh area, PLEASE give Electric All Pro a call. This is exactly the kind of locally owned business that deserves to thrive. I will recommend Hugo to absolutely everyone I know, and he will be my first”
“When I called for help with the troubleshooting, Hugo came out to my home in Durham and found the problem quickly. He was friendly and made for easy communication throughout the visit. As a licensed electrician, he explained the repair clearly so I knew exactly what was happening. He also cleaned up afterward, which I really appreciated. The price was fair for the work done, and the problem was solved completely. I was very pleased with how everything went. I would call them again.”
“Electric All Pro came out for Gas Bonding Wiring. Friendly, professional, fair price, and explained the repair. We will be reaching out to Hugo in the future for other projects.”
Recent Electrical Repair Jobs
Real repair calls in the Raleigh area, photographed on the day: the fault found, fixed and tested.
-
Hot Tub Tripping Breaker Repair
Hayes Barton, Raleigh, NC
Tripping Breaker
-
Ceiling Fan Repair with Fan-Rated Box
Mordecai, Raleigh, NC
Ceiling Fan Repair
-
GFCI Replacement for an Invisible Fence
Downtown Wake Forest, Wake Forest, NC
GFCI Replacement
Proudly Serving Raleigh, NC & The Surrounding Triangle
Electric All Pro provides professional electrical repair services throughout Raleigh, NC and the surrounding Triangle. Select your city below to confirm we service your area.
- Raleigh, NC
- Cary, NC
- Durham, NC
- Wake Forest, NC
- Apex, NC
- Morrisville, NC
- Knightdale, NC
- Garner, NC
- Clayton, NC
- Holly Springs, NC
- Fuquay-Varina, NC
- Wendell, NC
- Zebulon, NC
- Rolesville, NC
- Youngsville, NC
- And Surrounding Areas
Request a Diagnostic Visit
Tell us what isn’t working. We find the cause and quote the repair flat-rate.
- Flat-Rate Quote
- Licensed & Insured
- Lifetime Labor Warranty
Common Questions
Common questions from Raleigh homeowners about electrical repair service.
Speak directly with a licensed electrician in Raleigh — no call centers.
How much does electrical repair cost in Raleigh?
Most repairs run $300–$600, quoted flat-rate before work begins, and a repair of a known problem has a $300 minimum. Regular services are never less than $180, which usually covers one simple device. After hours, our 24/7 emergency repairs start at $360.
Do you charge a diagnostic or service call fee?
Only when we need to find the cause of a problem: a flat $89 diagnostic, disclosed up front when you book and waived on approved repairs of $300 or more. A known job, like replacing a switch, is simply its listed price.
Can you fix it the same visit?
Usually. Our vans stock the common breakers, devices, and materials, so most diagnosed issues are repaired on the spot.
Why does my breaker keep tripping?
Overloaded circuit, short circuit, ground fault, or a failing breaker — each has a distinct test signature. Controlled testing tells us which, so the fix is the right one. Worth knowing: a breaker itself gets replaced rather than repaired, so circuit breaker repair usually means correcting the fault on the circuit behind it — which is where the real problem almost always sits.
Is a warm outlet really dangerous?
Yes — warmth means resistance at a connection, which is how electrical fires start. Stop using the outlet and have it inspected promptly.
Do repairs come with a warranty?
Yes. Our labor carries a lifetime warranty. Standard breakers we supply are covered for 3 years, AFCI and GFCI breakers and other devices we supply for 1 year. If our workmanship ever fails, we return at no charge.


















