Skip to main content
Electric All Pro Electrician
Completed Project · Panel Upgrade

Siemens 200-Amp Panel Replacement in Oakwood, Raleigh

The homeowners in Oakwood, Raleigh, needed a lasting solution for a corroded electrical panel that an earlier repair had not fixed. We recommended a full replacement and installed a new Siemens 200-amp panel under a city permit.

  • Oakwood, Raleigh, NCWhere
  • June 2026Completed
  • Electrical Panel ReplacementService
  • PermittedPermit
Request a Similar Job Call (919) 670-4005
The new Siemens 200-amp panel open, with its main breaker and a clean, orderly breaker layout.

Before and After

The original panel, showing corrosion and cluttered wiring before the replacement.
The new Siemens 200-amp panel open, with its main breaker and a clean, orderly breaker layout.

What We Found

The electrical panel was corroded, with rust, a damaged metal frame and corrosion that had eaten completely through the side of the enclosure. An earlier repair had not solved the problem.

What We Did

  1. We assessed the condition of the corroded panel.
  2. We recommended replacing the panel rather than attempting another repair.
  3. We removed the corroded panel from the exterior wall of the home.
  4. We installed a new Siemens 200-amp panel in its place.

The Result

The corroded panel has been replaced with a new Siemens 200-amp panel that has a clean, orderly breaker layout. The homeowners can now sell the property knowing the panel is ready for a private home inspection.

The panel replacement was carried out under a city permit.

What We Installed

  • Siemens 200-amp panelReplacement for the corroded electrical panel.

The Job, Photo by Photo

10 photos from the job. Tap any photo to see it full size.

The original panel, showing corrosion and cluttered wiring before the replacement.
Rust and a damaged metal frame on the original panel show how far it had deteriorated.
The original panel open, with the heaviest corrosion concentrated along its lower edge.
A corroded connector, photographed while the panel replacement was under way.
The panel open mid-installation, with wiring and breakers exposed as the work progressed.
The new Siemens 200-amp panel open, with its main breaker and a clean, orderly breaker layout.
Breaker labels in the new panel identify circuits such as the sub-panel, air conditioning, range and water heater.
The completed installation on the exterior wall of the home, beside the utility meter.
The old panel on the ground, its cover broken and its breakers exposed.
Corrosion had eaten completely through the side of the old panel, leaving a visible hole in the enclosure.

Need the Same Work at Your Home?

Licensed and insured in North Carolina (NC Electrical License L.32531). Free estimates.

More panel upgrades Electrician in Raleigh This job in the gallery All projects
Request a Similar Job Call (919) 670-4005