Aluminum Wiring Repair in Raleigh, NC
Every aluminum connection at your outlets, switches, lights and splices pigtailed to copper with connectors rated for both metals, without rewiring the house.
Per Connection $45–$85 A typical home has 40 to 60 connections, about $2,500–$5,000 in all, done in one or two days. Every connection is counted at a free estimate, with the price in writing. 5.0 out of 5(185+ Google reviews) 185+ Google reviews Licensed & Insured NC License L.32531- Every outlet, switch, light and splice
- Connectors rated for aluminum and copper
- Every circuit tested before we leave
Get a Free Estimate
Tell us about the house. We’ll call you back to count the connections and give you a price.
Aluminum Wiring Repair Pricing Guidance
Aluminum wiring repair in Raleigh, NC is priced per connection, after a free estimate that counts them.
-
Per Connection
$45–$85
- Aluminum wire pigtailed to copper
- Connector rated for both metals
- Device reconnected to copper only
-
Typical Home
$2,500–$5,000
- 40 to 60 connections
- Done in one or two days
- Every circuit tested
-
Heat-Damaged Devices
Replaced
- Outlets or switches that show heat
- Replaced, not reused
- Part of the repair
-
Estimate
Free
- Every connection counted
- Written price before any work
- No obligation
The price is per connection, so it follows your house: every outlet, switch, light and junction box on an aluminum circuit is counted at the free estimate.
-
Number of Connections
A typical home has 40 to 60: every outlet, switch, light and junction box on an aluminum circuit.
-
Access to Each Box
Boxes behind heavy furniture, in finished basements or high ceilings take longer to reach.
-
Damaged Devices
An outlet or switch already damaged by heat is replaced as part of the repair.
A full copper rewire is the other option; it is priced on its own as whole-house rewiring.
Free Installation EstimateDo You Have Aluminum Wiring, and How Is It Fixed?
Homes built roughly 1965 to 1973 in the Raleigh area are the likely ones.
-
How to Spot Aluminum Wiring
Cable jackets stamped AL or ALUMINUM, usually in homes from 1965 to 1973.
- Cable jackets stamped AL or ALUMINUM, in the attic or basement
- Usually in homes built about 1965 to 1973 in the Raleigh area
- Warm outlet or switch plates, flickering lights, outlets that work on and off
-
The Fix: Pigtailing
Each aluminum wire joined to a copper pigtail with a rated connector.
- Each aluminum wire joined to a short copper lead with a connector rated for aluminum and copper
- The outlet or switch is reconnected to copper only
- The aluminum wire stays in the walls: no full rewire needed
Every Connection Counted
Every connection is counted at a free estimate, with the price in writing. Never plain wire nuts: only connectors rated for aluminum and copper.
Aluminum Wiring Repair Overview
Many Raleigh-area homes built between about 1965 and 1973 have aluminum branch wiring. The wire itself carries power fine; the trouble is at the connections, where aluminum loosens and oxidizes at outlets, switches, lights and splices over decades of heating and cooling. We repair it connection by connection: each aluminum wire gets a short copper pigtail joined with a connector rated for aluminum and copper, so the outlet or switch only ever touches copper.
-
Fixed at Every Connection
-
Rated for Both Metals
-
No Full Rewire Needed
When To Schedule Aluminum Wiring Repair
Aluminum connections give warnings before they fail. Book a repair when any of these apply:
- A home built roughly 1965 to 1973 that has never been checked
- Cable jackets in the attic or basement stamped "AL" or "ALUMINUM"
- Outlets or switch plates that feel warm to the touch
- Lights that flicker or outlets that work on and off
- A burning smell or discolored outlet or switch plates
- A home inspection or insurance company asking about aluminum wiring
Common Reasons Homeowners Book This Service
Homes from the late 1960s and early 1970s, inspection findings before a sale, insurance questions, and warm or flickering outlets and switches.
What’s Included / What’s Not
Here’s exactly what our standard aluminum wiring repair includes, and what falls outside it.
Included
-
Every Connection Counted
Each outlet, switch, light and junction box on an aluminum circuit, listed in your written price.
-
Copper Pigtails
Each aluminum wire joined to a short copper lead with a connector rated for aluminum and copper.
-
Devices Reconnected
Outlets and switches reconnected to copper only, and any heat-damaged device replaced.
-
Every Circuit Tested
Each repaired circuit turned back on and tested before we leave.
Found Something Bigger?
-
See whole-house rewiring
A Full Copper Rewire
Replacing the wire itself is our whole-house rewiring service, priced separately.
-
See panel repair
Panel Work
A panel repair or upgrade, if the panel needs one, is quoted separately.
Not Included
-
Decorative Fixtures
New light fixtures or designer devices you choose are priced on their own.
-
Drywall and Paint
Patching around new openings is a separate trade.
How Aluminum Wiring Gets Repaired Properly
Every aluminum wiring repair in Raleigh, NC starts with a count: how many connections the house has, and which ones already show heat.
-
1
Find and Count the Connections
We confirm the aluminum branch circuits, then count every outlet, switch, light and splice they feed, so the price is in writing before any work.
-
2
Pigtail Each Aluminum Wire
With the circuit off, each aluminum wire is joined to a short copper lead with a connector rated for aluminum and copper, and the device is reconnected to copper only.
-
3
Test Every Circuit
Each repaired circuit is turned back on and tested, and any outlet or switch that showed heat damage is replaced.
Warm Outlet or Switch Plate?
Turn that circuit off and call us; heat at a connection is the warning sign.Benefits of Aluminum Wiring Repair
Aluminum wiring repair in Raleigh, NC removes the weak point at every connection and keeps the wiring you already have.
-
No Loose Aluminum Joints
The connection that loosens and heats up is replaced with one made for aluminum and copper.
-
Walls Stay Closed
The work happens at the boxes you already have, not through new holes in the drywall.
-
Lights and Splices Too
Ceiling lights and junction-box splices are part of the count, not just the outlets you can see.
-
Answers the Inspection
When a home inspector flags aluminum branch wiring, you have the repair and the paperwork.
What Homeowners Say
In Recent Reviews Online
Homeowners across Raleigh and the Triangle trust our electrical services for reliable results and honest work.
“Electric All Pro came out for Gas Bonding Wiring. Friendly, professional, fair price, and explained the repair. We will be reaching out to Hugo in the future for other projects.”
“⭐⭐⭐⭐⭐ I want to leave an honest review because my experience with Hugo was ultimately positive, although it wasn't without some frustration along the way. I originally called because I had two breakers that repeatedly kept tripping. On the first visit, Hugo replaced both breakers and I paid approximately $360. Unfortunately, shortly after he left, the breakers started tripping again, so the original $360 repair did not solve the actual problem. I was disappointed and concerned because I knew something else had to be wrong, and with an electrical issue I was obviously worried about safety. I contacted Hugo again and explained my concerns. To his credit, he did not walk away from the problem. He came back to the house and spent additional time trying to determine what was causing the breakers to trip, even though the cause wasn't immediately apparent. Before his next scheduled visit, I happened to discover the problem myself. I raise African Grey parrots, and one of them had managed to chew through part of a wall and severely damage several electrical wires. The amount of damage was shocking, with exposed wiring that could have caused a very serious situation. Once we knew where the problem was, Hugo came back and repaired the damaged wiring and got everything taken care of. I paid an additional $480+ for that work. I'm giving Hugo five stars because I believe it's important to judge the entire experience, not just one part of it. He was personable, professional, and most importantly, he came back and followed through until the actual problem was repaired. I appreciate that. My one disappointment was the initial $360 spent replacing two breakers that ultimately were not the cause of the problem and did not stop them from tripping. I wish the underlying circuit problem had been investigated further before replacing the breakers. That said, electrical problems can sometimes be difficult to track down—especially when the actual cause turns out to be something as unusual”
“Although unable to assist with a wiring issue (not All-Pro’s fault at all), our assigned technician Hugo was able to fix a faulty socket, and recommend a solution to the wiring problem all within about 30 minutes. Electric All Pro will be our go to electricians from now on!”
Optional Add-Ons for Aluminum Wiring Repair
These add-ons are commonly paired with aluminum wiring repair in Raleigh, NC homes.
-
Boxes open
New Outlets and Switches
Boxes openSwap tired devices for new ones, GFCI or USB outlets while every box is already open.
-
At the panel
Whole-House Surge Protection
At the panelProtect everything plugged into your newly repaired circuits from power surges at the panel.
-
Same visit
Hardwired Smoke Alarms
Same visitOlder homes often need their smoke alarms replaced too; we can do both in one visit.
Aluminum Wiring NEC Code Requirements
Connections to aluminum wire in North Carolina homes follow the National Electrical Code as the state adopts it.
-
NEC 110.14
1. Connectors Rated for Both Metals
Aluminum and copper may only be joined in a connector identified for that use.
NEC Ref: 110.14. Conductors of dissimilar metals shall not be intermixed in a terminal or splicing connector where physical contact occurs between dissimilar conductors unless the device is identified for the purpose and conditions of use.
-
NEC 406.3(C)
2. Devices Marked for Aluminum
An outlet connected directly to aluminum wire must be marked CO/ALR; ordinary outlets are not.
NEC Ref: 406.3(C). Receptacles rated 20 amperes or less and designed for the direct connection of aluminum conductors shall be marked CO/ALR.
-
NEC 404.14(C)
3. Switches Marked for Aluminum
The same rule applies to switches: CO/ALR for a direct aluminum connection.
NEC Ref: 404.14(C). Snap switches rated 20 amperes or less directly connected to aluminum conductors shall be listed and marked CO/ALR.
-
NEC 110.14(D)
4. Tightened to the Rated Torque
Every terminal is tightened to the value the maker lists, which matters most on aluminum.
NEC Ref: 110.14(D). Where a tightening torque is indicated as a numeric value on equipment or in installation instructions, a calibrated torque tool shall be used to achieve the indicated torque value.
Proudly Serving Raleigh, NC & The Surrounding Triangle
Electric All Pro repairs aluminum wiring throughout Raleigh, NC and the surrounding Triangle.
Not sure if we service your area?
Select your city to confirm, or see all service areas.
- Raleigh, NC
- Cary, NC
- Durham, NC
- Wake Forest, NC
- Apex, NC
- Morrisville, NC
- Knightdale, NC
- Garner, NC
- Clayton, NC
- Holly Springs, NC
- Fuquay-Varina, NC
- Wendell, NC
- Zebulon, NC
- Rolesville, NC
- Youngsville, NC
- And Surrounding Areas
Ready to Make Your Aluminum Wiring Safe?
Tell us about the house. Free estimate, every connection counted.
- Free Estimate
- Licensed & Insured
- Lifetime Labor Warranty
Common Questions
Common questions from Raleigh homeowners about aluminum wiring.
Speak directly with a licensed electrician in Raleigh — no call centers.
How much does aluminum wiring repair cost in Raleigh?
$45 to $85 per connection. A typical home has 40 to 60 connections, about $2,500 to $5,000 in all, and the work takes one or two days. We count every connection at a free estimate and give you the price in writing before any work.
Is aluminum wiring dangerous?
The wire itself carries power fine. The risk is at the connections: aluminum expands, loosens and oxidizes at outlets, switches and splices, and a loose connection heats up. Repairing every connection removes that weak point.
Do I have to rewire the whole house?
No. Pigtailing every connection with connectors rated for aluminum and copper leaves the wire in the walls and makes the connections safe. A full copper rewire is the other option; see our whole-house rewiring service.
How do I know if my house has aluminum wiring?
Homes built roughly 1965 to 1973 are the likely ones. Look at the cable jackets in the attic, basement or garage for "AL" or "ALUMINUM", or ask us to check. Never take a panel cover off yourself.
Can I just use wire nuts?
No. Ordinary twist-on wire nuts are not a safe permanent fix for aluminum to copper. We use connectors identified for joining aluminum and copper.
Is the aluminum service cable to my panel a problem too?
No. Large aluminum service and feeder cables are normal and allowed. The concern is the small aluminum branch circuits that feed outlets, switches and lights.











