Electrical Panel Repair & Breaker Replacement in Raleigh, NC
Failed and tripping breakers replaced, burnt and loose connections repaired, and older panels checked, so your panel is safe again without replacing what still works. We find the cause and quote the repair before any work begins.
Most Panel Repairs $300–$600 Diagnosis included in most repairs. One written flat-rate price before work begins. Need troubleshooting first? $89 diagnostic visit when the cause must be found, credited toward an approved repair of $300 or more, including a later repair visit. 5.0 out of 5(185+ Google reviews) 185+ Google reviews Licensed & Insured NC License L.32531- Listed breakers matched to your panel
- Hot spots and loose connections found
- Repair or replacement, both prices in writing
Request a Panel Repair Visit
Tell us what your panel is doing. We’ll review your request and contact you about scheduling.
Burning smell, heat or crackling at the panel? Turn off the main only if it is safe, then call our 24/7 emergency service.
- Most Panel Repairs $300–$600 Diagnosis included. One flat written price before work.
- Breaker or Connection $300–$360 A single failed breaker or connection, repaired to code.
- Diagnostic Visit $89 Only to find the cause; credited on an approved repair of $300+.
- Replacement Estimate Free When the panel cannot be made safe, both prices side by side.
Electrical Panel Repair Pricing Guidance
Panel repair in Raleigh, NC is priced flat once we find the cause. These are the factors that move the price.
-
Most Panel Repairs
$300–$600Diagnosis included. Quoted flat-rate, in writing, before work begins.
-
Single Breaker or Connection
$300–$360One failed breaker or connection, repaired with a written quote.
-
Diagnostic — When Needed
$89Only when testing is needed to find the cause. Credited toward an approved repair of $300 or more, even on a later visit; repairs under $300 do not get the credit.
-
One Breaker or Several
A single failed breaker or connection is the low end; heat damage across several spaces takes longer.
-
Breaker Type
Standard breakers cost less than the AFCI and GFCI breakers that bedrooms, kitchens and baths need today.
-
Panel Condition
A burnt bus bar, heavy rust or a panel brand with a poor record can make replacement the safer answer.
Repair vs. replacement. If the panel cannot be made safe through repair, the replacement estimate is free and you see both prices separately. You decide. See panel replacement options from $2,000
Most panel repairs, diagnosis included; a single breaker or connection is $300–$360, quoted flat before work. The $89 diagnostic is waived on approved repairs of $300 or more; a panel replacement estimate is free.
Repair or Replace?
The panel is inspected first, the issue is explained, and we determine whether a repair will make it safe or a replacement is the better option. Both can be quoted when needed.
We inspect first and explain what we found
YesRepair
A targeted fix for the specific issue.
- Most panel repairs: $300–$600
- Single breaker or connection: $300–$360
NoReplacement
When the panel cannot be made safe through repair.
- Replacement estimate: Free
- From $2,000 on the panel upgrade page
What’s Wrong With My Panel?
Here are the most common signs of panel problems and what to do next. If you notice burning, heat or crackling, treat it as an emergency.
Signs Your Panel Needs a Repair
- A breaker that will not reset, or trips again right away
- A breaker or the panel cover that feels warm
- Scorch marks, melted plastic or rust inside the panel
- Lights across the house dim when a large appliance starts
- A Federal Pacific, Zinsco or Challenger panel still in service
Electrical Panel Repair & Breaker Replacement Overview
Most panels that act up do not need replacing. A breaker that will not reset, a breaker that is warm to the touch, a burning smell at the panel or a buzzing bus usually traces back to one part or one connection. We open the panel, find the failed breaker or loose connection, replace it with a breaker your panel is listed for, and tighten every connection we touch to its rated torque. When the panel itself is the problem, such as a Federal Pacific Stab-Lok, a Zinsco or a bus bar that has burned, we say so plainly and put the repair price beside the replacement price.
- Right Breaker, Right Panel
- Every Connection Checked
- Repair or Replace, Straight
When To Schedule Electrical Panel Repair
A panel gives warning signs before it fails. Book a repair when you notice any of the signs above.
Burning Smell or Heat? Turn off the main if it is safe to reach and call our 24/7 line.Common Reasons Homeowners Book This Service
Failed and tripping breakers, burnt or loose connections, rusted panels, missing covers and blanks, two wires on one breaker, and older Federal Pacific or Zinsco panels checked for repair or replacement.
How the $89 Diagnostic Works
The diagnostic visit is for when we need to find the cause of the problem. You get an inspection, a clear explanation and one written price before any work. A known job, like replacing a breaker you know has failed, is simply its price.
- Inspect the panel and breakers
- Test and find the cause
- Explain what we found
- Give one flat written price
- Answer your questions
What Happens Next?
-
You approve a repair of $300 or more
The $89 is credited toward the repair total, including a later visit.
-
Repair under $300
The $89 diagnostic fee remains payable.
-
No repair approved
The $89 covers the visit and the diagnosis.
-
Panel cannot be made safe
We provide a free replacement estimate and show both prices side by side. You decide.
What’s Included / What’s Not
Here’s exactly what our standard electrical panel repair includes, and what falls outside it.
Included
-
Panel Inspection
Cover off; bus, lugs, neutral and ground bars checked for heat, rust and loose connections.
-
Breaker Replacement
The failed breaker replaced with one listed for your panel.
-
Connections Torqued
Every lug and terminal we touch tightened to the maker’s torque value.
-
Directory Updated
The circuit labels corrected for anything we changed, and the circuit retested under load.
Not Included
-
Panel Replacement
A new panel is its own job, priced on a free estimate.
-
Wiring Past the Panel
A fault found on the branch wiring is quoted as its own repair.
-
Utility Equipment
The meter and the service wires to the house belong to the power company.
-
Drywall and Paint
Patching around a flush-mounted panel is a separate trade.
How Electrical Panel Repair Gets Done Safely
Every panel repair in Raleigh, NC starts with the cover off and the panel tested, so the fix goes to the part that failed, not the breaker that tripped.
-
1
Open, Test and Inspect
We test the breaker and the circuit behind it, and look over the bus, the lugs, the neutral and ground bars and the cover for heat damage, rust and loose connections.
-
2
Flat Price Before Work
You get a flat price for the repair before we start. When the panel cannot be made safe, you get the replacement price beside it, and you decide.
-
3
Repair, Torque and Label
The failed breaker or connection is replaced with a part listed for your panel, every connection we touch is torqued to spec, the circuit is retested under load and the directory is updated.
Breaker Will Not Stay On? Most breaker and connection repairs are finished in one visit. Request a panel repair visit
Is Your Panel Brand a Known Problem?
Here’s what we check for common older panel brands, and what usually happens next. Federal Pacific Stab-Lok and Zinsco panels have a long record of breakers that may not trip when they should. We inspect the panel first, go over what we found with you, and price the repair or the replacement based on its condition.
Federal Pacific Stab-Lok
- Breaker condition and operation
- Signs of heat damage
- Loose connections
- Overall panel condition
Zinsco (and Sylvania-Zinsco)
- Breaker condition and operation
- Signs of heat damage
- Loose connections
- Panel type and overall condition
Challenger
- Breaker condition and operation
- Panel condition and wiring
- Whether it can be made safe
Split-bus panels
- Panel design and breaker layout
- Wiring and connection condition
- Whether it can be made safe
Repair when safe: $300–$600. Replacement estimate: free. Replacement from $2,000 on the panel upgrade page.
Benefits of Repairing Your Panel the Right Way
A careful panel repair in Raleigh, NC fixes the fault that tripped the breaker and leaves a panel you can rely on.
-
Burnt Parts Replaced
Breakers and connections damaged by heat or arcing come out of the panel, not back into service.
-
Repair When Repair Is Enough
A single failed breaker in a sound panel is a repair, not a reason to replace the panel.
-
Tested Before We Leave
Every circuit we work on is retested under load once the repair is made.
Panel Repair Warranty: Lifetime Labor, Reliable Parts
Our labor and workmanship
If it was installed right, it stays right. Any defect in our work, we come back and fix it at no charge.
Breaker Warranty
Breakers we supply carry different terms by type.
-
Standard circuit breakers (we supply)
3 yearsA thermal-magnetic breaker is a simple, durable device. Three years is comfortably inside what we see fail.
-
AFCI, GFCI and dual-function breakers (we supply)
1 yearThese have electronics inside and fail more often than a plain breaker. Every manufacturer shortens its own term on them for the same reason. One year is what we will promise rather than something we cannot back.
-
Materials you supply
Not covered. We will install it, but we cannot stand behind a part we did not choose or source.
-
Non-Transferable
The warranty is tied to the original customer’s ownership of the property.
-
How to Make a Claim
Call or email and describe the problem before anyone else works on it. No forms, no claim number.
What People Say About
Our Electrical Services
Homeowners across Raleigh and the Triangle trust our electrical services for reliable results and honest work.
“⭐⭐⭐⭐⭐ I want to leave an honest review because my experience with Hugo was ultimately positive, although it wasn't without some frustration along the way. I originally called because I had two breakers that repeatedly kept tripping. On the first visit, Hugo replaced both breakers and I paid approximately $360. Unfortunately, shortly after he left, the breakers started tripping again, so the original $360 repair did not solve the actual problem. I was disappointed and concerned because I knew something else had to be wrong, and with an electrical issue I was obviously worried about safety. I contacted Hugo again and explained my concerns. To his credit, he did not walk away from the problem. He came back to the house and spent additional time trying to determine what was causing the breakers to trip, even though the cause wasn't immediately apparent. Before his next scheduled visit, I happened to discover the problem myself. I raise African Grey parrots, and one of them had managed to chew through part of a wall and severely damage several electrical wires. The amount of damage was shocking, with exposed wiring that could have caused a very serious situation. Once we knew where the problem was, Hugo came back and repaired the damaged wiring and got everything taken care of. I paid an additional $480+ for that work. I'm giving Hugo five stars because I believe it's important to judge the entire experience, not just one part of it. He was personable, professional, and most importantly, he came back and followed through until the actual problem was repaired. I appreciate that. My one disappointment was the initial $360 spent replacing two breakers that ultimately were not the cause of the problem and did not stop them from tripping. I wish the underlying circuit problem had been investigated further before replacing the breakers. That said, electrical problems can sometimes be difficult to track down—especially when the actual cause turns out to be something as unusual”
“Hugo was great to work with. Good communication, he installed and upgraded new panels with no issues at all. I highly recommend him!”
“Hugo was wonderful! He was prompt to complete the work, informative, and very responsive. He did a great job replacing the outdoor breaker box and his prices were very reasonable. I would highly recommend!”
Recent Panel and Breaker Repair Jobs
Real jobs, photographed on the day. Every one was permitted and inspected where the code required it.
-
Commercial Circuit Repair and Panel Investigation
Mordecai, Raleigh, NC
Panel Investigation
-
Commercial Refrigerator Breaker Repair
Oakwood, Raleigh, NC
Breaker Repair
-
Hot Tub Tripping Breaker Repair
Hayes Barton, Raleigh, NC
Tripping Breaker
Optional Add-Ons for Electrical Panel Repair
These add-ons are often worth doing while the panel is open in Raleigh, NC homes.
-
Cover already off
Whole-House Surge Protection
Cover already offA Type 2 surge protector installed at the panel while the cover is already off.
-
Today’s protection
AFCI and GFCI Breakers
Today’s protectionBring bedroom, kitchen, laundry and bath circuits up to today’s protection.
-
Free estimate
Panel Replacement Estimate
Free estimateWhen the panel is near the end of its life, a free replacement estimate beside the repair.
Electrical Panel Repair NEC Code Requirements
A panel repair has to leave the panel as safe as the day it was listed: the right parts, tight connections and a clear directory.
-
NEC 110.3(B)
1. Breakers Listed for the Panel
A replacement breaker must be a type the panel’s label lists, or a classified breaker made for that panel. A breaker that only fits is not enough.
NEC Ref: 110.3(B). Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.
-
NEC 110.14(D)
2. Connections Torqued to Spec
Every lug and terminal we touch is tightened with a torque tool to the value the manufacturer marks.
NEC Ref: 110.14(D). Where a tightening torque is indicated as a numeric value on equipment or in installation instructions, a calibrated torque tool shall be used to achieve the indicated torque value.
-
NEC 110.12(B)
3. No Damaged Parts Left In
Parts damaged by heat, arcing, rust or water are replaced, not cleaned up and left in service.
NEC Ref: 110.12(B). There shall be no damaged parts that may adversely affect safe operation or mechanical strength of the equipment.
-
NEC 408.4(A)
4. A Clear Circuit Directory
Every circuit is labeled so anyone can tell what each breaker controls.
NEC Ref: 408.4(A). Every circuit and circuit modification shall be legibly identified as to its clear, evident, and specific purpose or use.
Proudly Serving Raleigh, NC & The Surrounding Triangle
Electric All Pro provides professional electrical panel repair services throughout Raleigh, NC and the surrounding Triangle. Select your city below to confirm we service your area.
- Raleigh, NC
- Cary, NC
- Durham, NC
- Wake Forest, NC
- Apex, NC
- Morrisville, NC
- Knightdale, NC
- Garner, NC
- Clayton, NC
- Holly Springs, NC
- Fuquay-Varina, NC
- Wendell, NC
- Zebulon, NC
- Rolesville, NC
- Youngsville, NC
- And Surrounding Areas
Ready for a Panel You Can Trust?
Tell us what your panel is doing and request a repair visit. Need a new panel instead? The replacement estimate is free.
- Flat Written Price
- Licensed & Insured
- Lifetime Labor Warranty
Guides for This Job
Panel Repair Questions
Common questions from Raleigh homeowners about electrical panel repair.
Speak directly with a licensed electrician in Raleigh — no call centers.
How much does electrical panel repair cost in Raleigh?
Most panel repairs run $300–$600, quoted flat before work begins. A single failed breaker or connection is $300–$360. If the panel needs replacing instead, that estimate is free.
Can a breaker be repaired, or does it have to be replaced?
A breaker is replaced, not repaired. What we repair is the reason it failed: a loose or burnt connection, an overloaded circuit or a fault on the wiring behind it.
Should I repair or replace a Federal Pacific or Zinsco panel?
We check it first and tell you what we find. Federal Pacific Stab-Lok and Zinsco panels have a long record of breakers that may not trip when they should, so in most homes replacing the panel is the safer choice. You get both prices in writing and you decide.
Why is my electrical panel buzzing or warm?
A faint hum under heavy load can be normal. Loud buzzing, crackling or heat usually means a loose connection or a failing breaker, which is how panel fires start. Stop using that circuit if you can and have the panel checked promptly.
Is a burning smell from the panel an emergency?
Yes. If it is safe to reach, turn off the main breaker, keep everyone away from the panel and call us. Our emergency line is answered 24/7.
Do panel repairs come with a warranty?
Yes. Our labor carries a lifetime warranty, standard breakers we supply are covered for 3 years, and AFCI and GFCI breakers we supply for 1 year. If our workmanship ever fails, we come back at no charge.