Skip to main content
Electric All Pro Electrician
Last updated: November 2026
Bathroom Fans, Vented Outside

Bathroom Exhaust Fan Installation in Raleigh, NC

Noisy and dead fans replaced, new fans in bathrooms that have none, and ducts run to the outside where the moisture belongs. Sized to the room, wired to your control, and tested before we leave.

Bathroom Fan, Per Fan $360–$450 Installed, wired and tested. A new location that needs a new vent run to the outside or a new circuit is confirmed on site. You supply the fan, or we quote it. Installation estimates are free. 5.0 (185+ Google reviews) Licensed & Insured NC License L.32531
  • Vented to the outside, never the attic
  • Sized to the room
  • Switch, timer or humidity control
New bathroom exhaust fan housing and blower set in a ceiling opening sealed with foil tape, installed by Electric All Pro
Vented to the OutsideNot into the attic. Every time.

Get a Free Installation Estimate

Tell us about the fan and the bathroom. We’ll call you back with a price and a time.

What do you need?
Cost Overview

Bathroom Exhaust Fan Pricing Guidance

Bathroom fan installation in Raleigh, NC depends mostly on what is already in the ceiling. These are the factors with the biggest effect.

A new location that needs a new vent run to the outside or a new circuit is confirmed on site. You supply the fan, or we quote it for you. Installation estimates are free.

A bathroom with no fan yet needs a new opening, duct and wiring; we confirm its price when we see the attic and the ceiling.

Free Installation Estimate
Bathroom Exhaust Fan Installation

Vented Outside, and the Right Fan Size

A bathroom exhaust fan must send the moist air outdoors through a duct to a cap on the side of the house, not into the attic, where the moisture can lead to mold and wood damage.

$360–$450 per fan A new location that needs a new vent run to the outside or a new circuit is confirmed on site.
Bathroom exhaust fan housing set in attic insulation with its foil flex duct connected and running away

The Key Takeaway

Vented outside, sealed correctly, and sized for your bathroom. A 50 CFM fan covers small and medium bathrooms; larger rooms get about 1 CFM per square foot of floor. We size it at your free estimate.

Bathroom Exhaust Fan Installation Overview

A bathroom fan only works if the moist air it pulls out actually leaves the house. We replace noisy and dead fans, install fans in bathrooms that never had one, and make sure the duct runs to the outside, not into the attic. The fan is sized to the room, wired to the control you want, and tested for airflow before we leave.

White slotted bathroom exhaust fan grille in a smooth ceiling next to a recessed light
  • Vented Outside

  • Sized to the Room

  • Your Choice of Control

When To Schedule Bathroom Exhaust Fan Service

Moisture that stays in a bathroom ends up as peeling paint, mold and swollen trim. Book a fan replacement or installation if any of these apply:

Common Reasons Homeowners Book This Service

Noisy or dead fan replacement, new fans in bathrooms that have none, fans that vent into the attic, and upgrades to quiet, humidity-sensing models.

Service Details

What’s Included / What’s Not

Here’s exactly what our standard bathroom fan installation includes, and what falls outside it.

Included

  • Old Fan Removal

    The old fan and housing removed and hauled away.

  • New Fan Installed

    Housing fastened to the framing and the fan wired to your control.

  • Duct Connected and Sealed

    The duct connected to the fan and sealed to the existing outside cap.

  • Airflow Test

    The fan run and checked for airflow and a working damper.

Found Something Bigger?

  • New Wall Vent

    A new opening through the side of the house is quoted after we see it.

    Ask at your estimate
  • New Circuit From the Panel

    Where no suitable circuit is near, it is quoted as a small wiring job.

    See dedicated circuits

Not Included

  • The Fan Itself

    You can pick the fan, or we can quote one for you.

  • Drywall and Paint

    Patching and paint beyond the fan grille are a separate trade.

Service Process

How a Bathroom Fan Installation Gets Done Properly

Every bathroom fan job in Raleigh, NC starts in the attic or behind the ceiling, where the duct and the wiring are.

  1. Old bathroom fan housing in the ceiling with its grille off and a tape measure along the side 1

    Ceiling, Duct and Circuit Check

    We check the opening, the framing, where the existing duct goes, and the circuit feeding the fan. A duct that ends in the attic is pointed out before we start.

  2. Cut-open ceiling showing a fan housing connected to foil-taped flexible duct and its cable 2

    Mount, Duct and Wire

    The new fan housing is fastened to the framing, the duct is connected and sealed to the outside termination, and the fan is wired to your chosen control.

  3. White louvered bathroom exhaust fan grille fitted in a textured ceiling 3

    Test and Finish

    We run the fan, check that it pulls air, confirm the damper opens and closes, and leave the grille and ceiling clean.

Ready to Clear the Steam?

A fan replacement in an existing location is usually done in one visit.
Real Home Gains

Benefits of a Properly Installed Bathroom Fan

A bathroom fan that actually moves air out protects your paint, trim and ceiling, and keeps the room comfortable.

  • Less Mold and Mildew

    Steam is pulled out before it settles on the ceiling, grout and walls.

  • Paint and Trim Last

    No more peeling paint above the shower or swollen door trim.

  • Outside, Not the Attic

    A duct that ends in the attic leaves wet air on the roof deck and insulation; we run it outside.

  • Runs When It Should

    Timers and humidity controls run the fan long enough to clear the room, then shut it off.

Customer Reviews

What Homeowners Say
In Recent Reviews Online

Homeowners across Raleigh and the Triangle trust our electrical services for reliable results and honest work.

5.0 185+ Google Reviews See all reviews
Featured review

“Hugo was very professional. He told me everything that he was doing. Hugo did an awesome job. Will be using this business again. Thanks Hugo.”

Jeannie King, Google reviewer
Jeannie King

“Hugo was phenomenal and for free troubleshooted at midnight and held me turn back on my power to my house! He prevented me having to spend about $300 to have somebody come out to troubleshoot it! Even let me know that if my breaker trips three times in a week then it's bad and time to replace. He is very knowledgeable and customer service oriented! Thank you Hugo!”

Ben Rutter, Google reviewer
Ben Rutter

“I had an issue with an electrical outlet not working and called Hugo for help. Hugo was incredibly helpful and patient, walking me through the problem step-by-step over the phone. His guidance was clear and effective, and he helped me resolve the issue without charging me a dime. It's rare to find such genuine and honest service these days. I highly recommend Hugo to anyone in Apex, NC for any electrical needs.”

Arun Kanathil, Google reviewer
Arun Kanathil
Recent Jobs

Recent Bathroom Fan Jobs

Real jobs, photographed on the day. Every one was permitted and inspected where the code required it.

See the whole gallery
Service Options

Optional Add-Ons for Bathroom Exhaust Fan Installation

These add-ons are commonly recommended with bathroom fan installation in Raleigh, NC based on what we find on site.

Ask about add-ons at your free estimate
Electrical Standards

Bathroom Exhaust Fan NEC Code Requirements

Bathroom fan installation must follow the National Electrical Code for bathroom circuits, wet areas and grounding.

  • NEC 410.10(D)

    1. Rated for the Shower Zone

    A fan with a light installed over a tub or shower must be listed for damp or wet locations.

    NEC Ref: 410.10(D). Luminaires located within the actual outside dimension of the bathtub or shower to a height of 2.5 m vertically from the top of the bathtub rim or shower threshold shall be marked suitable for damp locations, or marked suitable for wet locations where subject to shower spray.

  • NEC 210.11(C)(3)

    2. Bathroom Circuits

    Bathroom outlets are on their own 20-amp circuit; a fan sharing it has to fit the rules for that circuit.

    NEC Ref: 210.11(C)(3). At least one 120-volt, 20-ampere branch circuit shall be provided to supply bathroom receptacle outlet(s).

  • NEC 210.8(A)(1)

    3. GFCI in Bathrooms

    Bathroom outlets need GFCI protection, and many fan makers require it for units over a tub or shower.

    NEC Ref: 210.8(A)(1). Receptacles installed in bathrooms shall have ground-fault circuit-interrupter protection for personnel.

  • NEC 250.110

    4. Grounded Housing

    The fan's metal housing is connected to the equipment ground, with splices made inside the fan's wiring box.

    NEC Ref: 250.110. Exposed, normally non-current-carrying metal parts of fixed equipment likely to become energized shall be connected to an equipment grounding conductor.

Our License: NC Electrical Contractor License L.32531 Verify on NC Board site
Downtown Raleigh, NC at night
Local Coverage

Proudly Serving Raleigh, NC & The Surrounding Triangle

Electric All Pro provides professional bathroom exhaust fan installation throughout Raleigh, NC and the surrounding Triangle.

Not sure if we service your area?

Select your city to confirm, or see all service areas.

Ready for a Bathroom That Dries Out?

Tell us about the fan and the bathroom. Free installation estimate, no obligation.

  • Free Estimate
  • Licensed & Insured
  • Lifetime Labor Warranty
Frequently Asked Questions

Common Questions

Common questions from Raleigh homeowners about bathroom exhaust fan installation.

Still have questions?

Speak directly with a licensed electrician in Raleigh — no call centers.

Real People. Real Answers.
We're here when you need us.
How much does it cost to replace a bathroom exhaust fan in Raleigh?

A bathroom exhaust fan installed, wired and tested is $360–$450. A new location that needs a new vent run to the outside or a new circuit is confirmed on site.

Can you install a fan in a bathroom that does not have one?

Yes. We cut the opening between the ceiling joists, run the duct to the outside, and bring power from a suitable circuit. It is quoted after we see the attic and the ceiling.

My fan vents into the attic. Is that a problem?

Yes. Warm, wet air in the attic condenses on the roof deck and insulation and can lead to mold and rot. The duct should end at an outside cap on the side of the house.

What size fan does my bathroom need?

A common rule is about one CFM of airflow per square foot of floor in a standard bathroom, with at least 50 CFM. Larger rooms, high ceilings or a separate toilet room may need more, and we size it on site.

Can the fan turn on by itself when it is humid?

Yes. Humidity-sensing fans and controls switch on when moisture rises and off when the room clears. Timer switches are another simple option.

Why is my bathroom fan so loud?

Worn motor bearings, a loose housing, or a duct that is crushed or too long. A new quiet fan on a clear duct fixes most noisy fans.

Call (919) 670-4005 Free Estimate